Specify An Ip Address - LevelOne WBR-3400TX User Manual

Wireless Router User Guide
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the LevelOne
54Mbps Wireless AP Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the LevelOne 54Mbps Wireless AP
Router.

Specify an IP Address

If your PC is already configured, check with your network administrator before making the
following changes.
1. The Default Gateway must be set to the IP address of the LevelOne 54Mbps Wireless AP
Router. To set this:
•
Click the Advanced button on the screen above.
•
On the following screen, click the Add button in the Gateways panel, and enter the
LevelOne 54Mbps Wireless AP Router's IP address, as shown in Figure 17 below.
•
If necessary, use the Up button to make the LevelOne 54Mbps Wireless AP Router
the first entry in the Gateways list.
Figure 16: Windows NT4.0 - IP Address
24