LevelOne WBR-3400TX User Manual page 24

54mbps wireless ap router w/ 4-port switch

Hide thumbs Also See for WBR-3400TX:

Table of Contents

PC Configuration

Checking TCP/IP Settings - Windows 9x/ME:

1. Select Control Panel - Network. You should see a screen like the following:

Figure 11: Network Configuration

2. Select the TCP/IP protocol for your network card.

3. Click on the Properties button. You should then see a screen like the following.

Figure 12: IP Address (Win 95)

Ensure your TCP/IP settings are correct, as follows:

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default

Windows setting. Using this is recommended. By default, the LevelOne 54Mbps Wireless AP

Router will act as a DHCP Server.

Restart your PC to ensure it obtains an IP Address from the LevelOne 54Mbps Wireless AP

Router.

Using "Specify an IP Address"

If your PC is already configured, check with your network administrator before making the

following changes:

Table of Contents