Table of Contents
Advertisement
Setup Wizard – VPN Setting: For detail settings, please refer to Section 4.15 VPN-IPSEC.
4.4 Basic Setting
4.4.1 Primary Setup – LAN's IP, WAN's MAC Address, WAN Type, Virtual
Computers
This configuration enables this product to work properly. The setting items and the web appearance
depend on the WAN type. Choose correct WAN type before you start.
1. LAN IP Address: It is the local IP address of this device. The computers on your network must use
the LAN IP address of your product as their Default Gateway. You can change it if necessary.
2. WAN's MAC Address: It is the MAC address of WAN interface of this device and can be set by
user manually. Usually, the device is attached with one unique MAC address when it leaves the
factory.
3. WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct
one from the following four options:
A. Static IP Address: ISP assigns you a static IP address.
B.
Dynamic IP Address: Obtain an IP address from ISP automatically.
C.
Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)
D. PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.
E.
PPTP: Some ISPs require the use of PPTP to connect to their services.
Chapter Home
14
Advertisement
Table of Contents
