LevelOne WBR-3400TX User Manual page 61

54mbps wireless ap router w/ 4-port switch
Hide thumbs Also See for WBR-3400TX:
Table of Contents

Advertisement

Wireless Router User Guide
This screen lists a number of pre-defined Servers, and allows you to define your own Servers.
Details of the selected Server are shown in the "Properties" area.
Data - Virtual Servers Screen
Servers
Servers
Properties
Enable
PC (Server)
Protocol
Internal Port No.
External Port No.
Buttons
Defaults
Figure 39: Virtual Servers Screen
This lists a number of pre-defined Servers, plus any Servers you
have defined. Details of the selected Server are shown in the
"Properties" area.
Use this to Enable or Disable support for this Server, as required.
If Enabled, any incoming connections will be forwarded to the
selected PC.
If Disabled, any incoming connection attempts will be blocked.
Select the PC for this Server. The PC must be running the appro-
priate Server software.
Select the protocol (TCP or UDP) used by the Server.
Enter the port number which the Server software is configured to
use.
The port number used by Internet users when connecting to the
Server. This is normally the same as the Internal Port Number. If it
is different, this device will perform a "mapping" or "translation"
function, allowing the server to use one port address, while clients
use a different port address.
This will delete any Servers you have defined, and set the pre-
defined Servers to use their default port numbers.
58

Advertisement

Table of Contents
loading

Table of Contents