Table of Contents
Advertisement
Data - Status Screen
Internet
Connection Method
Broadband Modem
Internet Connection
Internet IP Address
"Connection Details"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
Buttons
System Data
Restart
Refresh Screen
This indicates the current connection method, as set in the Setup
Wizard or WAN Port screen.
This shows the status of the connection from the LevelOne
54Mbps Wireless AP Router to the Broadband Modem.
Current connection status:
•
Active
•
Idle
•
Unknown
•
Failed
If there is an error, you can click the "Connection Details" button
to find out more information.
This IP Address is allocated by the ISP (Internet Service Pro-
vider). If there is no current connection, this will be blank or
0.0.0.0.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "Connection Log" may also be available.
The IP Address of the LevelOne 54Mbps Wireless AP Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and the
IP addresses allocated to them, use the PC Database option on
the Administration menu.
This displays the current name of the LevelOne 54Mbps Wireless
AP Router.
The current version of the firmware installed in the LevelOne
54Mbps Wireless AP Router.
Display all system information in a sub-window.
Clicking this button will restart (reboot) the LevelOne 54Mbps
Wireless AP Router. All existing connections though the Leve-
lOne 54Mbps Wireless AP Router will be terminated, but will
usually re-connect automatically.
Update the data displayed on screen.
Operation and Status
35
Advertisement
Table of Contents
