HP J3138A Installation Manual page 61

Table 4-5.
In the following example, the virtual configuration register is set to boot the
router from Flash memory and to ignore Break at the next reboot of the router:
The router creates a default boot filename as part of the automatic configura-
tion processes. The boot filename consists of cisco, plus the octal equivalent
of the boot field number, a hyphen, and the processor type.
N O T E
A boot system configuration command in the router configuration in NVRAM
overrides the default boot filename.
Default Boot Filenames
Action or Filename Bit 3
bootstrap mode 0
ROM software 0
cisco2-igs 0
cisco3-igs 0
cisco4-igs 0
cisco5-igs 0
cisco6-igs 0
cisco7-igs 0
cisco10-igs 1
cisco11-igs 1
cisco12-igs 1
cisco13-igs 1
cisco14-igs 1
cisco15-igs 1
cisco16-igs 1
cisco17-igs 1
Router> enable
password: enablepassword
Router# conf term
Enter configuration commands, one per line.
Edit with DELETE, CTRL/W, and CTRL/U; end with CTRL/Z
config-register 0x102
boot system flash [filename]
^Z
Router#
Maintaining the HP AdvanceStack Internet Router
Virtual Configuration Register Settings
Bit 2 Bit 1 Bit 0
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
4-11