9. Untie and discard the wire tie on the Main
Wire (110).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (110) and to the Pulse
Sensor Wires (63).
Insert the excess wire into the Upright (4) or into
the Console (7).
10. Tip: Avoid pinching the wires. Attach
the Console (7) to the Upright (4) with four
M4 x 16mm Screws (101); start all the Screws,
and then tighten them.
9
7
10
4
101
10
63
110
4
7
Avoid pinching
the wires
101