Panasonic MDF-594C Operating Instructions Manual page 10

FREEZER COMPONENTS
1. Lock
2. Door: Hinged type. The door can be opened in any angle on the way to full open.
3. Magnetic door gasket: Seals the door and prevents leakage of cold air.
4. Backup cooling kit joint (rear side): It is positioned at rear of the unit. Serves to connect with the
pipelines from the liquid CO cylinder.
2
5. Side panel
6. Digital temperature indicator: This indicator shows the present chamber temperature or set
temperature.
7. Control panel: Temperature set key, power switch and so on are installed. Refer to page 10 for
details.
8. Control panel cover
9. Control panel cover lock: To lock the control panel cover to avoid the setting by accidental contact.
10. Exhaust air vent: Be careful not to block this.
11. Air intake vent (grille): Do not block this vent to keep the proper cooling performance.
12. Space for temperature recorder: A temperature recorder can be attached here.
13. Leveling foot: Serves to adjust the height and to settle the frame.
14. Caster: 6 casters are provided to facilitate moving of the cabinet. For the installation, adjust the
leveling feet so that the front 3 casters cannot contact with the floor.
15. Access port: Serves a means of leading the measuring cable from the freezing room to the outside.
16. Inner lid: Serves as a means of reducing cold air leakage when the door is open. Remove the
frost before it is accumulated too much.
9