Loading Paper - Sagem Photo easy 150 User Manual

L
Tab
1 - Pull the paper tray out of the printer.
2 - Open a pack of paper with the protection sheet on the top, insert it in the paper tray, making
sure the rectangle reserved for postage stamps is on the outside of the tray, that is, towards you.
Make sure that the package of sheets that you have inserted in the paper tray is held down
under the plastic tab located at the front left of the tray (see illustration after).
3 - Remove the protection sheet.
4 - Line up the tray with its compartment and push it in slowly until the locking system clicks.
Warning -
handle paper sheets by their pre-cut edges, never allow your fingers to come into
contact with the shiny surface before printing.
Your SAGEM PHOTO EASY 150 printer is now ready to print your digital photographs.
Warning -
protect consumable items against prolonged exposure to light, humidly, heat and
dust. Respect the operation conditions set out (Refer to paragraph Technical data,
page -24).Only use SAGEM brand consumable items designed for this printer. Make sure that a
previously printed photograph has not been slipped inadvertently into a packet of blank pages;
this could damage the ribbon of your printer.
Warning -
Make sure that a previously printed photograph has not been slipped inadvertently
into a packet of blank pages; this could damage the ribbon of your printer.
OADING PAPER
- 5 -
Protection sheet