Welcome - Sagem Photo easy 150 User Manual

Universal personal photo printer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
1
W
ELCOME
You have just acquired a SAGEM PHOTO EASY 150 printer, and we thank you for choosing our
product. With this high quality printer you can get the most out of your digital photos. In a few
simple steps you can produce photo prints identical to those from a professional developer, for
your personal use or to share with friends and family.
The easy-to-follow steps in this user guide will walk you through:
1. Switching on your PHOTO EASY 150 printer
2. Printing photographs stored on a memory card
3. Printing photographs transferred from a camera in a GSM mobile phone
4. Installing the image processing software and printer driver on a PC
5. Maintenance and troubleshooting of your PHOTO EASY 150 printer
The CD-ROM included with your kit contains an additional guide with instructions for using the
image processing software and printer driver on your PC.
Safety instructions and recommendations
• Do not install your PHOTO EASY 150 printer in a humid room (bathroom, laundry, kit-
chen, etc.), or within 1.50 m of a tap or water source, or outside. The printer should be ope-
rated within an ambient temperature range of 10 °C to 35 °C.
• Do not install your printer in a location where there is a noticeable amount of dust floating
in the air. Such dust can degrade the print quality of your photos.
• Only the power supply provided with the printer should be used. Connect this to the mains
in accordance with the installation instructions in this user guide and the information on the
identification label affixed to the power supply (voltage, current, mains frequency)
• Never open the cover of the film cartridge compartment during printing. This could
break the film and cause printer malfunction.
• Only use SAGEM consumables, if not you are likely to damage the equipment and invali-
date the guarantee. To obtain the references of the consumables (Refer to paragraph Repla-
cement of consumables, page -20).
• The EC marking certifies that the product meets the main requirements of the European Par-
liament and Council directive 1999/5/CE on telecommunications terminal equipment,
regarding safety and health of users, and regarding electromagnetic interference.
1.
Excluding isolated neutral-type network installations as defined in the EN60950 standard.
- 1 -
1
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents