Table of Contents
Advertisement
2 SENDING/RECEIVING A FAX
Selecting the LDAP server
To search for the recipient's fax number in the LDAP server, press the pull-down menu in the recipient search
menu. The list of the LDAP servers is displayed. Press the LDAP server name you want to search, and then press
[OK].
3
The search result is displayed. Press the desired FAX icon (
Press
Alternatively, you can select the recipient by pressing the address name box. In such case, if a fax number and
an E-mail address have been registered to the recipient's address, both of them are selected.
To cancel the selected recipient, press it again.
In the memory transmission mode, you can specify multiple recipients to send the same document at once.
Repeat the recipient selection operation until all the recipients are selected. For the multi-address transmission,
you can also specify recipients by combining with other entry methods. The number of recipients you can
simultaneously specify is limited to 400.
To confirm all the selected recipients or delete unnecessary recipients, press [DESTINATION].
P.33 "Confirming the recipients"
32
Sending a Fax
or
to switch the pages.
), and then press [OK].
Advertisement
Table of Contents
