Setup; Unfolding The Handle - Toro Recycler 20339 Operator's Manual

131–4514
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts; keep all guards and
shields in place.
3. Cutting/dismemberment hazard of hand or foot, mower
blade—disconnect the spark-plug wire and read the
instructions before servicing or performing maintenance.
4. Thrown object hazard—keep bystanders a safe distance
from the machine; stop the engine before leaving the
operating position; pick up any debris before mowing.
5. Cutting/dismemberment hazard of hand or foot, mower
blade—do not operate up and down slopes; operate side to
side on slopes; look behind you when backing up.

Setup

Important: Remove and discard the protective plastic
sheet that covers the engine.
1

Unfolding the Handle

No Parts Required
Procedure
WARNING
Unfolding the handle improperly can damage the
cables, causing an unsafe operating condition.
• Do not damage the cable(s) when folding or
unfolding the handle.
• Ensure that the cable(s) are routed to the outside
of the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Move the handle rearward to the operating position
(Figure 3).
2. Set the handle lock
place to lock the handle into the operating position.
5
Figure 3
(Figure 4) until the pin clicks in