1. Firmly connect the supplied AC power cord (mains lead) to the AC IN jack on the rear
panel of the HDD AUDIO PLAYER, then connect the plug to a wall outlet (mains).
2. Press
to turn on the HDD AUDIO PLAYER.
The power lamp lights up in green.
[15] Preparations
Prep 4. Configuring the initial settings of the HDD AUDIO
PLAYER
When you turn on the HDD AUDIO PLAYER for the first time, it automatically enters the initial
settings mode. You can configure the initial settings of the HDD AUDIO PLAYER easily by
following the instructions on the screen.
Refer to each related topic for details on each item of the initial settings.
1. Press
to turn on the HDD AUDIO PLAYER.
2. Configure the initial settings by following the instructions on the screen.
When a screen appears to indicate that the initial settings are completed, select [Close].