Registered Music File - Sony HAP-Z1ES User Manual

On the HDD AUDIO PLAYER: Press the
On the remote control: Press the
On HDD Audio Remote: Operate the Power Control screen.
Adjusting the volume
On the remote control: Press the VOLUME +/– buttons.
On HDD Audio Remote: Tap the
Muting the sound
On the remote control: Press the MUTING button.
On HDD Audio Remote: Tap the muting button (
Hint
You can also configure settings so that they are not controlled by the remote control, such as
when you want to turn the power of the HDD AUDIO PLAYER off but do not want to turn the
amplifier off.
If you hold down the VOLUME + button for a long time, the HDD AUDIO PLAYER may stop
increasing the volume to prevent the volume level from suddenly becoming too high. If you
want to increase the volume level further, stop pressing the VOLUME + button briefly and
then press it again.
If you operate the connected amplifier using the remote control supplied with the HDD
AUDIO PLAYER, operation of the amplifier may become inconsistent (operating at times but
not operating at other times) due to interference of the remote control signal, especially if you
continuously control the volume.
For example, if the infrared signal from the supplied remote control directly enters the remote
sensor (receiver) of the connected amplifier, interference may occur with the signal input
from the IR input jack of the amplifier or the signal output from the installed IR blaster. This
causes the amplifier to fail to receive the correct signal, resulting in inconsistent response
from the amplifier.
In this case, place the amplifier in a location where it will not be affected by the infrared
signal of the remote control of the HDD AUDIO PLAYER.
It is recommended that you use HDD Audio Remote, to avoid interference problems.
[51] Useful functions
Registered music file information
The HDD AUDIO PLAYER analyzes the ID3 tag information, a type of music information
metadata contained in music files, and registers the files to [Genres], [Artists], [Albums] and
[Tracks]. If music files do not contain ID3 tags or if any of the information is missing, the HDD
AUDIO PLAYER automatically accesses the Gracenote server on the Web and obtains music
button.
button.
/ buttons on the volume adjustment area.
, , etc.)