Sony HAP-Z1ES User Manual page 110

the Internet.
1. Select [Settings] - [Network Update] in the Home screen.
If a newer version of the software is found, a software update notification screen appears.
2. Confirm the current version of the software and the new version of the software, and then
select [OK].
The HDD AUDIO PLAYER connects to the network and starts downloading the new
version of the software.
Installation will start automatically after downloading is complete.
You can confirm the progress status on the screen.
After the software update is complete, the HDD AUDIO PLAYER restarts automatically.
Note
Do not turn the HDD AUDIO PLAYER off or disconnect the LAN cable during the software
update. This may cause a malfunction.
Select [Cancel] to cancel the software update while downloading the software.
If the software update fails, an update error screen appears and the HDD AUDIO PLAYER
may restart.
If you update the software during playback, the playback stops.
The power is automatically turned off.
If the [Auto Standby] function is set to [On], the HDD AUDIO PLAYER is automatically turned
off after it is not operated for approximately 20 minutes.
If the sleep timer function is set, the HDD AUDIO PLAYER is automatically turned off when
the specific time you set has elapsed.
If you use the HDD AUDIO PLAYER while it is placed on a device that produces heat (such
as an amplifier), the temperature inside the HDD AUDIO PLAYER may rise and the power
may be turned off to protect the HDD AUDIO PLAYER. Do not place the HDD AUDIO
PLAYER on equipment that produces heat.
When the [Network Standby] function is set to [On], the HDD AUDIO PLAYER automatically
turns on when a music file transfer is performed by HAP Music Transfer or the HDD Audio
Remote application installed on your smartphone or tablet. The HDD AUDIO PLAYER turns
off automatically when the music files are transferred and registered.