System Connections - Onkyo T-4711 Instruction Manual

Fm stereo/am tuner fm stereo tuner
Hide thumbs Also See for T-4711:
Table of Contents

Advertisement

System connections

Do not plug in the power cord until all connections have been made.
On each pair of input or output jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to the left
channel.
A
Antenna connection
(See pages 6-7.)
1 Connecting the amplifier:
Connect the tuner's OUTPUT jacks and the amplifier's INPUT jacks
using the audio connection cable. Refer to the amplifier's instruction
manual for connections.
2 AC outlets (SWITCHED)
The shape, orientation, the number and total capacity of the AC outlets
may differ according to the model and the area where the unit is pur-
chased. Be careful that other components connected to this unit do not
exceed the capacity that is printed on the rear panel below under the
AC outlets.
When connecting other Integra series components (such as the A-
9911/9711, DX-7911/7711 or TA-6711), connect the power cords of
those components to this unit's AC outlets.
The unit may be turned ON or OFF according to the setting of
POWER button, ON or OFF, respectively.
When this unit is used as a timer, the other components that will be
switched on and off should be connected to this unit's AC outlets.
3 Connections for remote control
When this is connected to an amplifier with the Onkyo 7 jack, you
are able to operate it by pressing the TUNER buttons on the amplifi-
er's supplied remote control.
NOTE:
An 7 remote control cable equipped with a 1/8 (3.5 mm) diameter
miniature two-conductor phone plug is included with this unit and
with every compact disc player and cassette deck with the 7 mark.
Tuning Step Frequency
(See page 4. Worldwide model only)
ANTENNA
FM75
B
AM
FREQ. STEP
USA
OTHER
WARNING
AVIS
RISK OF ELECTRIC SHOCK
RISQUE DE CHOC ELECTRIQUE
DO NOT OPEN
NE PAS OUVRIR
1
L
R
Amplifier
REMOTE
OUTPUT
CONTROL
L
FM STEREO / AM TUNER
T-4711
MODEL NO.
RATING: AC120/220-230V
50/60Hz
12W
R
2-1,NISSHIN-CHO,NEYAGAWA-SHI,OSAKA,
JAPAN
MADE IN JAPAN
220-230V
Voltage selector
3
(See page 4. World
wide model only)
To wall outlet
Configuration and the number
of outlets may vary depending
on places of destination.
VOLTAGE SELECTOR
120V
AC OUTLETS
SWITCHED
TOTAL 500W MAX.
Amplifier
A-9711
CD player
T-4711
Cassettedeck
2
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents