System Management; Configure System Timings - Gigaset N510 IP PRO Configuration Manual

4. S M
YSTEM ANAGEMENT
Under the section Configuration  Management it is possible to manage the system and:
- Configure the system timetable
- Select the country in which you find yourself (useful for the Country Code and ring tone),
-
Start the registration of DECT telephones on the DECT base station.
-
Restart the base or reset factory settings
-
Make a backup of the settings or restore
-
Update the Firmware (via the Gigaset server)
C S
ONFIGURE YSTEM
Enter in the section Configuration  Management  Date and Hour to configure the time adding a
STNP server or, in the event in which the base does not have internet access, specify manually the
date and time. It is also possible to enable the automatic updating of daylight saving time.
The configurations shown below are useful for the automatic update of the date and time and
daylight saving time via the SNTP server (NB. the Base station must have internet access)
If there is no internet access, you only need to select 'No' in the section 'Automatic update of the
system time' and insert the date and time manually.
T
IMINGS
19
Configuration Manual
(for VOIspeed 6)