Onkyo TX-SR601E Instruction Manual page 18

Onkyo instruction manual av receiver tx-sr701/701e tx-sr601/601e
Hide thumbs Also See for TX-SR601E:
Table of Contents

Advertisement

Connections
Connecting a DVD Player with 2-Channel (L/R) Audio Output
GND
: Signal flow
4. Connecting a DVD player (DVD)
Using an RCA video cable, connect the video output jack
(composite) of the DVD player to the DVD V IN jack of the TX-
SR701/701E/601/601E. Or if the DVD player has an S video output
jack, connect it to the DVD S IN jack with an S video cable. Or if
the device has component video outputs, connect them to the
COMPONENT VIDEO INPUT 1 or 2 jacks on the TX-SR701/
701E/601/601E.
With the initial settings of the TX-SR701/701E/601/601E, the
DVD input source is set for the COMPONENT VIDEO INPUT
1 jacks.
If you connect the DVD player to the COMPONENT VIDEO
INPUT 2 jacks, this must be changed at "Input Setup" →
"Component Video" (see page 53).
Using an RCA audio connection cable, connect the audio output
jacks of the DVD player to the DVD FRONT L/R jacks of the TX-
SR701/701E/601/601E. Make sure that you properly connect the
left channel to the L jack and the right channel to the R jack.
If the device has a 5.1-channel output, connect the DVD FRONT L/
R, SURR L/R, CENTER, and SUBWOOFER (5.1-channel input)
jacks of the TX-SR701/701E/601/601E to the 5.1-channel output
jacks of the DVD player. Make sure that you properly connect the
left channels to the L jacks and the right channels to the R jacks.
If the device has a digital output, connect it to either the DIGITAL
IN COAXIAL jack or the DIGITAL IN OPTICAL jack of the TX-
SR701/701E/601/601E depending on the type of connector on the
DVD player.
With the initial settings of the TX-SR701/701E/601/601E, the
DVD input source is set for digital input at the OPTICAL 1 jack
(OPT 1).
If the digital connection is made at a different jack, this must be
changed at "Input Setup" → "Digital Input" (see page 52).
Note:
If the DVD player has both 5.1-channel audio outputs and 2-
channel audio outputs, and you want to connect the DVD player
only using the FRONT L/R jacks on the TX-SR701/701E/601/
601E, use the 2-channel audio output jacks on the DVD player.
18
ANTENNA
AM
COMPONENT VIDEO
INPUT 2
INPUT 1
OUTPUT
Y
P
B
P
R
DIGITAL
VIDEO 3
VIDEO 2
COAXIAL
IN
IN
IN
OUT
OUT
OPTICAL
OPTICAL
2
1
IN
COAXIAL
IN
IN
IN
IN
IN
OUT
OUT
L
R
PHONO
CD
TAPE
VIDEO 3
VIDEO 2
FM 75
ZONE 2
LINE OUT
L
R
REMOTE
CONTROL
VIDEO 1
DVD
MONITOR
ZONE 2
IN
IN
OUT
OUT
12 V
12 V
TRIGG
TRIGG
V
OUT
OUT
IR IN
S
IN
FRONT
SURR
CENTER
OUT
L
R
SUB
VIDEO 1
WOOFER
DVD
Component video output
Video output
S video output
4. DVD player (DVD)
L (white)
Analog audio output
Digital audio output
R (red)
(optical)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tx-sr701Tx-sr701eTx-sr601

Table of Contents