System Management; Power Management And Performance Features; Erp Compliance Mode - HP Z228 Maintenance And Service Manual

2

System management

This section describes the tools and utilities that provide system management for the workstation.
Power management and performance features on page 9
BIOS ROM on page 10
Computer Setup (f10) Utility on page 10
Desktop management on page 23

Power management and performance features

ERP compliance mode

This computer provides ERP compliance mode capability.
When enabled, the computer shuts down to the lowest possible power state. The computer must then be
turned on with the power button. One of the effects is that "wake on LAN" is disabled.
When disabled, the computer powers down conventionally.
Enabling ERP compliance mode
Disabling ERP compliance
mode
Topics
1. Press f10 during startup.
2. Using the arrow keys, select the Power > Hardware Power Management > S5 Maximum
Power Savings, then select Enable.
3. Press f10 to accept the change.
4. Select File > Save Change and Exit, and then press
5. If using Windows 8 or Windows 8.1, boot to Windows and search in the Start Menu for the
setting Change what the power buttons do. Uncheck Turn on fast startup (recommended).
If the checkbox is not available, select Change settings that are currently unavailable at the
top of the window.
1. Press f10 during startup.
2. Using the arrow keys, select Power > Hardware Power Management > S5 Maximum Power
Savings, then select Disable.
3. Press f10 to accept the change.
4. Select File > Save Change and Exit, and then press
5. If using Windows 8 or Windows 8.1, boot to Windows and search in the Start Menu for the
setting Change what the power buttons do. Check Turn on fast startup (recommended). If
the checkbox is not available, select Change settings that are currently unavailable at the
top of the window.
enter to accept the change.
enter to accept the change.
Power management and performance features 9