System Management; Power Management Features; Erp Compliance Mode - HP Z1 G2 Maintenance And Service Manual

2

System management

This section describes the tools and utilities that provide system management for the workstation.
Power management features on page 11
BIOS ROM on page 12
Computer Setup (F10) Utility on page 13
Desktop management on page 23

Power management features

ERP compliance mode

This computer provides ERP compliance mode capability.
When this feature is enabled, the computer shuts down to the lowest possible power state. The computer
must then be turned on with the power button. One of the effects is that "wake on LAN" is disabled.
When this feature is disabled, the computer shuts down conventionally.
Enabling ERP
compliance mode
Disabling ERP
compliance mode
Topics
1. Power on or restart the workstation and press
utility.
2. Using the arrow keys, select Power, then Hardware Power Management, and then S5 Maximum Power
Savings.
3. Select Enable, and then press
4. Select File, and then select Save Change and Exit. Press
5. If using Windows 8 or Windows 8.1, boot to Windows and search in the Start Menu for the setting
Change what the power buttons do. Uncheck Turn on fast startup (recommended). If the checkbox is
not available, select Change settings that are currently unavailable at the top of the window.
If using Windows 10, use the taskbar search field to search for Power Options. Select Choose what the
power button does, then select Turn on fast startup (recommended).
1. Power on or restart the workstation and press
utility.
2. Using the arrow keys, select Power, then Hardware Power Management, and then S5 Maximum Power
Savings.
3. Select Disable, and then press
4. Select File, and then select Save Change and Exit. Press
5. If using Windows 8 or Windows 8.1, boot to Windows and search in the Start Menu for the setting
Change what the power buttons do. Check Turn on fast startup (recommended). If the check box is
not available, select Change settings that are currently unavailable at the top of the window.
If using Windows 10, use the taskbar search field to search for Power Options. Select Choose what the
power button does, then select Turn on fast startup (recommended).
F10 during startup to launch the Computer Setup (F10)
Enter to accept the change.
Enter
F10 during startup to launch the Computer Setup (F10)
Enter to accept the change.
Enter
to accept the change.
to accept the change.
Power management features 11