Onkyo HT-R640 Instruction Manual page 53

Listening to the Radio—Continued
TUNING
Setting the Satellite Radio Mode
1
On the AV receiver, press the
SETUP
[SETUP] button.
2
Use the TUNING Up or Down
[ ]/[ ] buttons to select
TUNING PRESET
"7. Hardware Setup," and then
press [ENTER].
7.Hardware Setup
------------------------
a.SAT Radio
b.Remote ID
c.HDMI Audio Out :Off
d.SW Input Sensitivity
ENTER
3
Use the TUNING Up or Down [ ]/
[ ] buttons to select "SAT
TUNING PRESET
Radio," and then use the PRESET
[ ]/[ ] buttons to select "XM."
Pressing the PRESET [
tons cycles through the following SAT
options: None ↔ XM.
TUNING PRESET
None: Select if you are not using sat-
ellite radio.
XM: Select to use XM satellite
ENTER
radio.
4 Press the [SETUP] button.
Selecting XM Satellite Radio
Press the [TUNER] input selector
TUNER
button repeatedly to select XM.
If "CHECK ANTENNA" appears on
the display, make sure the XM Passport
System is connected properly.
, PRESET , ENTER
TUNER SETUP
: None
:1
: 0dB
]/[ ] but-
Signing Up for XM Satellite Radio
Before you can use XM Satellite Radio, you must first
sign up for an account. You'll need a major credit card
and your XM Satellite Radio ID, which you can get from
the AV receiver, as explained below, or from the Passport
System package and itself.
1 Use the TUNING Up and Down
[ ]/[ ] buttons to select
TUNING PRESET
channel 0.
Your XM Satellite Radio ID number is
displayed. Write it below.
ID
2 To sign up, go to:
http://activate.xmradio.com
Or call: 1-800-967-2346
For XM Canada, go to:
http://xmradio.ca
Or call: 1-877-GET-XMSR
Notes:
• Channel 0 cannot be selected in Category Search
mode. You must select Channel Search mode (see
page 54).
• The following letters are not used in XM Satellite
Radio IDs: I, O, S, F.
53