Onkyo HT-R640 Instruction Manual page 51

Listening to the Radio—Continued
Displaying Radio Text (RT)
When tuned to an RDS station that's broadcasting text
information, the text can be displayed.
Press the [RT/PTY/TP] button
RT/PTY/TP
once.
The RT information scrolls across the
display.
Notes:
• The message "Waiting" may appear while the AV
receiver waits for the RT information.
• If the message "No Text Data" appears on the display,
no RT information is available.
Finding Stations by Type (PTY)
You can search for radio stations by type.
1 Use the [TUNER] input selector
TUNER
button to select FM.
2 Press the [RT/PTY/TP] button
twice.
RT/PTY/TP
The current program type appears on
the display.
3
Use the PRESET [
TUNING PRESET to select the type of program you
want.
See the table on page 50.
ENTER
RT/PTYTP
RT/PTY/TP
1 3-5
RT/PTYTP
2
]/[ ] buttons
4 To start the search, press
[ENTER].
The AV receiver searches until it finds a
station of the type you specified, at
ENTER
which point it stops briefly before con-
tinuing with the search.
5
When a station you want to listen
to is found, press [ENTER].
If no stations are found, the message
"Not Found" appears.
ENTER
Listening to Traffic News (TP)
You can search for stations that broadcast traffic news.
1
Use the [TUNER] input selector
TUNER
button to select FM.
2
Press the [RT/PTY/TP] button
three times.
RT/PTY/TP
If the current radio station is broadcast-
ing TP (Traffic Program), "[TP]" will
appear on the display, and traffic news
will be heard as and when it's broad-
cast. If "TP" without square brackets
appears, this means that the station is
not broadcasting TP.
3
To locate a station that is broad-
casting TP, press [ENTER].
The AV receiver searches until it finds a
station that's broadcasting TP.
ENTER
If no stations are found, the message
"Not Found" appears.
3
1
RT/PTYTP
2
51