Table of Contents
Advertisement
(5) Machine default
Auto drawer switching
Enables or disables the auto drawer switching
function and sets whether "All types of paper" or
"Feed same paper type" is selected.
1. Select "Auto drawer switching" ("Auto
cassette switching") and press the [Change #]
key.
2. Select "On" or "Off".
3. Select "All types of paper" or "Feed same
paper type".
Paper size (drawer No.1 & No.2)
Sets the size of paper that is loaded in drawers 1
and 2.
1. Select one of the "Paper size" settings ("1st
drawers" or "2nd drawer") and press the
[Change #] key.
2. Select the paper size.
Paper type (drawer No.1 - No.5)
Sets the type of paper for drawers 1 through 5.
1. Select one of "Paper type" settings ("1st
drawer" through "5th drawer") and press the
[Change #] key.
2. Select the paper type.
Select paper type (2 sided)
Sets whether or not each of custom paper types
(custom 1 - custom 8) will be available for 2 sided
copying.
1. Select "Select paper type (2 sided)" and
press the [Change #] key.
2. Select one of the "custom" paper type
settings ("custom 1" through "custom 8") and
set "On" or "Off".
Select paper type (for used paper)
Sets whether or not the used paper function will
be turned on for each custom type of paper
(custom 1 - custom 8).
1. Select "Select paper (Used Paper)" ["Select
'used paper' type"] and press the [Change #]
key.
2. Select one of the "custom" paper type
settings ("custom 1" through "custom 8") and
set "On" or "Off".
Select paper type (for high-resistance paper)
Sets whether or not the high-resistance paper
function will be turned on for each custom type of
paper (custom 1 - custom 8).
1. Select "Sel.(High resist.paper)" ["Sel.'High
resist.paper'"] and press the [Change #] key.
2. Select one of the "custom" paper type
settings ("custom 1" through "custom 8") and
set "On" or "Off".
Auto shutoff time
Sets the auto shutoff time.
1. Select "Auto shut-off time" and press the
[Change #] key.
2. Press the +/- keys to set the auto shutoff
time.
Setting range: 15 to 240 minutes
Auto preheat time
Sets the auto preheat time.
1. Select "Auto preheat time" and press the
[Change #] key.
2. Press the +/- keys to set the auto preheat
time.
Setting range: 1 to 45 minutes
Note: Set the auto preheat time to be shorter
than the auto shutoff time.
Copy eject location setting
Sets the copy eject location when a finisher and a
multi-job tray are installed.
1. Select "Select Copy output mode" and press
the [Change #] key.
2. Select the eject location.
Key sound
Sets if a beep sounds when a key on the key
press panel is pressed.
1. Select "Key sound ON/OFF" and press the
[Change #] key.
2. Select "On" or "Off".
Silent mode
Selects whether or not to enter silent mode after
copying.
1. Select "Silent Mode" and press the [Change
#] key.
2. Select "On" or "Off".
Day & time
Sets the current date and time.
1. Select "Day & time" and press the [Change #]
key.
2. Press the +/- keys to set the year, month, day,
hour, and minute respectively.
Time difference
Sets the time difference.
1. Select "Time difference" and press the
[Change #] key.
2. Press the +/- keys to set the time difference.
Setting range: +12:00 to -12:00
2BC/D-1
1-4-5
Advertisement
Table of Contents
