Uniden UH5045 Owner's Manual page 16

Mounting the MIC Hanger for Remote SPK/MIC
Microphone Microphone
Microphone
Radio
The plug of the extension cable connects to the Radio. The socket end of the extension
cable connects with the microphone plug.
1. The rubber collar (dust cover) on the microphone cable is not required
and can be cut away or pushed out of the way along the cable.
2. Drill a 13mm hole at the MIC hanger location.
3. Thread the microphone plug through the hole and connect with the
extension cable.
4. Mount the MIC Hanger over the hole and cable.
5. At the Radio: Connect the extension cable plug to the rear MIC Jack.
Fit the rubber bushing over the front MIC jack.
UNIDEN UH5045
2
2
4
4
1
1
5
5
Radio
Radio
16
Extension Cable
Extension Cable
Extension Cable
UHF CB Transceiver
3 3