Table of Contents
Advertisement
8
2
7
4
5
Figure 12
1. Ignition switch
2. Motion control lever
3. Parking brake lever
4. Throttle
5. Choke
Using
Parking Brake
the
Always set the parking brake when you stop the machine
or leave it unattended.
Important
Do not park on slopes unless wheels are
chocked or blocked.
Setting the Parking Brake
1. Move the motion control levers (Fig. 12) out to the
neutral lock position.
2. Pull back and up on the parking brake lever to set the
parking brake (Fig. 13). The parking brake lever
should stay firmly in the engaged position.
1
8
2
3
10
6
9
m–4200
6. Power take off (PTO)
7. Height-of-Cut lever
8. Fuel cap
9. Hourmeter
10. Fuel shut-off valve
Releasing the Parking Brake
1. Push forward and down on the parking brake lever to
release the parking brake (Fig. 13).
1
2
Figure 13
1. Parking brake—ON
Using the Blowout Baffles
Blowout baffles are used when in side discharge mode
only.
Important
Do not use blowout baffles while in
recycling mode.
1. To install or remove blowout baffles, install or remove
bolts as shown in Figure 14.
2
3
1
Figure 14
1. Bolts
2. Front of deck
18
m–4121
2. Parking brake—OFF
3. Baffles
Advertisement
Table of Contents
