Parking Brake - Toro 30182 Operator's Manual

Parking Brake

Always set the parking brake when you stop the
machine or leave it unattended.
Setting the Parking Brake
1. Pull the upper control bar (Fig. 12) rearward and
hold it in this position.
2. Lift the parking brake lock (Fig. 12) up and
gradually release the upper control bar. The
brake lock should stay in the set (locked)
position.
Releasing the Parking Brake
1. Pull rearward on the upper control bar (Fig. 12).
Lower the parking brake lock to the released
position.
2. Gradually release the upper control bar.
2
Figure 12
1. Upper control bar
1
2. Parking brake lock
Operation
17