First Time Setup—Continued
Component Video Input Setup
If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 2, you must assign
COMPONENT VIDEO IN 2 to the DVD/BD input
selector.
Input selector
DVD/BD
VCR/DVR
CBL/SAT
AUX
TV/TAPE
CD
PORT
ENTER
SETUP
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [q]/[w]
buttons to select "1. Input
Assign", and then press
[ENTER].
42
Default assignment
IN1
- - - - -
IN2
- - - - -
- - - - -
- - - - -
- - - - -
RECEIVER
qwer
3
Use the Up and Down [q]/[w]
buttons to select
"1-2. Component", and then
press [ENTER].
4
Use the Up and Down [q]/[w]
buttons to select an input
selector, and use the Left and
Right [e]/[r] buttons to select:
IN1: Select if the video component
IN2: Select if the video component
- - - - -: Select if you're not using the
5
Press the [SETUP] button.
Setup closes.
Notes:
• If you connect an input component (such as UP-A1
series Dock that seated iPod or iPhone) to the
UNIVERSAL PORT jack, you cannot assign any
input to PORT selector.
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
is connected to
COMPONENT VIDEO IN 1.
is connected to
COMPONENT VIDEO IN 2.
COMPONENT VIDEO
OUT.