Yaesu FT-950 Technical Supplement page 3

Receiver
Circuit Type:
Intermediate Frequencies:
Sensitivity:
Squelch Sensitivity:
Selectivity (WIDTH: Center):
Image Rejection:
Maximum Audio Output:
Audio Output Impedance:
Conducted Radiation:
Specifications are subject to change, in the interest of technical improvement, without notice or obligation,
and are guaranteed only within the amateur bands.
FT-950 Technical Supplement
Triple-conversion Superheterodyne
69.450 MHz/450 kHz/30 kHz (24 kHz for AM/FM)
SSB (BW: 2.4 kHz, 10 dB S+N/N)
4 µV (0.5 - 1.8 MHz) (IPO "ON")
0.2 µV (1.8 - 30 MHz) (AMP 2 "ON")
0.125 µV (50 - 54 MHz) (AMP 2 "ON")
AM (BW: 6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz)
28 µV (0.5 - 1.8 MHz) (IPO "ON")
2 µV (1.8 - 30 MHz) (AMP 2 "ON")
1 µV (50 - 54 MHz) (AMP 2 "ON")
FM (BW: 15 kHz, 12 dB SINAD)
0.5 µV (28 - 30 MHz) (AMP 2 "ON")
0.35 µV (50 - 54 MHz) (AMP 2 "ON")
There is no specification for frequency ranges not listed.
SSB/CW/AM
2 µV (0.1 - 1.8 MHz)
2 µV (50 - 54 MHz)
FM
1 µV (28 - 30 MHz)
1 µV (50 - 54 MHz)
There is no specification for frequency ranges not listed.
Mode -6 dB
CW/RTTY/PKT 0.5 kHz or better
SSB 2.4 kHz or better
AM 6 kHz or better
FM 15 kHz or better
70 dB or better (160 - 10m Amateur bands)
60 dB or better (6m Amateur band)
2.5 W into 4 Ohms with 10% THD
4 to 8 Ohms (4 Ohms: nominal)
Less than 4 nW
Specifications
-60 dB
750 Hz or less
3.6 kHz or less
15 kHz or less
25 kHz or less
Specifications-3