Vivotek FD816B-H(T) User Manual page 273

7.39 camera PTZ control (SD series)
Group: camctrl (the bit7 of capability_ptzenabled is 0 and the bit4 of capability_ptzenable is 1)
k denotes the value of "capability_npreset"
NAME
ccdtype
motortype
cameraid
panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
preset_i<0~(k-1)>_name
preset_i<0~(k-1)>_pan
preset_i<0~(k-1)>_tilt
preset_i<0~(k-1)>_zoom
preset_i<0~(k-1)>_focus
preset_i<0~(k-1)>_fliped
patrol_i<0~39>_name
patrol_i<0~39>_ dwelling
VALUE
string[16]
string[16]
1 ~ 255
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
string[40]
capability_ptz_minpan ~
capability_ptz_maxpan
capability_ptz_mintilt ~
capability_ptz_maxtilt
capability_ptz_minzoom ~
capability_ptz_maxzoom
capability_ptz_minfocus ~
capability_ptz_maxfocus
<boolean>
string[40]
0 ~ 999
SECURITY DESCRIPTION
(get/set)
6/7 (Internal used, read only)
6/7 (Internal used, read only)
1/4 Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have
to be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
1/4 Pan speed
1/4 Tilt speed
1/4 Zoom speed
1/4 Auto pan speed
1/4 Auto focus speed
1/4 Name of the preset location.
1/4 Pan position at each preset location.
1/4 Tilt position at each preset location.
1/4 Zoom position at each preset location.
1/4 Focus position at each preset location.
1/4 Flip side at each preset location.
1/4 (For internal device)
The name of patrol location
1/4 (For internal device)
VIVOTEK
User's Manual - 273