Vivotek FD816B-H(T) User Manual page 203

NAME
enable
name
polygonstd
objsize
sensitivity
<Not recommended to use
this>
polygonpx
<Not recommended to use
this>
polygon
<Not recommended to use
this>
VALUE SECURITY
(get/set)
<boolean> 4/4
string[14] 4/4
0 ~ 9999,0 ~ 9999, 4/4
0 ~ 9999,0 ~ 9999,
0 ~ 9999,0 ~ 9999,
0 ~ 9999,0 ~ 9999
1 ~ 100 4/4
1 ~ 100 4/4
0 ~ W,0 ~ H, 0 ~ 4/4
W,0 ~ H, 0 ~ W,0 ~
H, 0 ~ W,0 ~ H
W: 0~ The current
image width -1
H: 0~ The current
image height -1
0 ~ 320,0 ~ 240, 0 4/4
~ 320,0 ~ 240, 0 ~
320,0 ~ 240, 0 ~
320,0 ~ 240
DESCRIPTION
Enable motion detection window.
Name of motion window.
Coordinate of polygon window position.
(4 points: x0,y0,x1,y1,x2,y2,x3,y3)
* Only available when
"capability_motion_wintype" = polygon.
* Only available when std is listed in
"capability_motion_windomain
Percent of motion detection window.
Sensitivity of motion detection window.
* We replace "sensitivity" with
"win_sensitivity".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
Coordinate of polygon window position.
(4 points: x0,y0,x1,y1,x2,y2,x3,y3)
* Only available when
"capability_motion_wintype" = polygon.
* Only available when px is listed in
"capability_motion_windomain
* It's recommended to use polygonsd
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
Coordinate of polygon window position.
(4 points: x0,y0,x1,y1,x2,y2,x3,y3)
* Only available when
"capability_motion_wintype" = polygon.
* Only available when qvga is listed in
"capability_motion_windomain
VIVOTEK
User's Manual - 203