Vivotek FD816B-H(T) User Manual page 176

VIVOTEK
s<0~(m-1)>_m 20000~"capability_videoin_c<n>_mj
jpeg_bitrate peg_maxbitrate"
s<0~(m-1)>_m framerate,imagequality
jpeg_prioritypoli
cy
s<0~(m-1)>_m 1~"capability_videoin_c<n>_mjpeg_
jpeg_maxframe maxframerate"
wdrpro_mode <boolean>
<product
dependent>
wdrpro_strengt 1~100
h
<product
dependent>
wdrc_mode <boolean>
<product
dependent>
wdrc_strength 1~100
<product
dependent>
aespeed_mode <boolean>
<product
176 - User's Manual
"capability_smartstream_version"=2.
0
4/4 The target bit rate in constant bit rate
mode.
* Only valid when "ratecontrolmode"=
cbr
4/4 Set prioritypolicy
* Only valid when "ratecontrolmode"=
cbr
1/4 The maximum frame rates of a mjpeg
stream at different
resolutions("capability_videoin_c0_re
solution ") are recorded in
"capability_videoin_c<n>_mjpeg_ma
xframerate"
4/4 Enable WDR pro
* Only available when
"capability_image_c<n>_wdrpro_mo
de" > 0
4/4 The strength of WDR Pro.
The bigger value means the stronger
strength of WDR Pro.
* Only available when
"capability_image_c<n>_wdrpro_stre
ngth" is 1
4/4 Enable WDR enhanced.
* Only available when
"capability_image_c<n>_wdrc_mode
" is 1
4/4 The strength of WDR enhanced.
The bigger value means the stronger
strength of WDR enhanced.
* Only available when
"capability_image_c<n>_wdrc_mode
" is 1
4/4 Turning AE converge speed on or off.
0: off