Vivotek FD816B-H(T) User Manual page 268

VIVOTEK
tiltspeed
panspeed
zoomspeed
autospeed
rotatespeed
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the number of streams which support
ePTZ. (capability.eptz > 0)
PARAMETER
patrolseq
patroldwelling
preset_i<0~19>_name
preset_i<0~19>_pos
preset_i<0~19>_size
268 - User's Manual
-5 ~ 5 1/7
-5 ~ 5 1/7
-5 ~ 5 1/7
1 ~ 5 1/7
1 ~ 5 1/7
VALUE SECURITY
(get/set)
string[120] 1/4
string[160] 1/4
string[40] 1/7
<W,H> 1/7
<product dependent>
<WxH> 1/7
<product dependent>
Tilt speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Pan speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Zoom speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
Rotate speed (only for Fisheye series)
* Only available when "capability_fisheye" is 1
and "capability_fisheyelocaldewarp_c<n>" is 0
(It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
DESCRIPTION
The patrol sequence of ePTZ. All the patrol
position indexes will be separated by ","
The dwelling time (unit: second) of each patrol
point, separated by ",".
Name of ePTZ preset.
(It should be set by ePreset.cgi rather than by
setparam.cgi.)
Left-top corner coordinate of the preset.
(It should be set by ePreset.cgi rather than by
setparam.cgi.)
Width and height of the preset.
(It should be set by ePreset.cgi rather than by
setparam.cgi.)