Vivotek FD816B-H(T) User Manual page 10

Hide thumbs Also See for FD816B-H(T):
Table of Contents

Advertisement

VIVOTEK
8. Install the dome cover by aligning the crescent cutout with the protruding tab on the base
plate.
8
9. Remove the protection membrane from the dome cover.
LED Definitions
Item LED status
1
Steady
Red
Red
LED off
Green
LED off
2
Steady
Red
sec.
3
Green
LED blinks every 1 sec. and
LED blinks consecutively every 0.15 sec.
4
Green
and
RED
and
RED
light on, then blink again.
5
RED
LED is on,
LED is constantly on.
Green
and
RED
10 - User's Manual
and
Green
LED blinks every 1
blink every 0.15 sec,
Green
LED blinks and
LEDs are constantly on.
Description
Powered and system booting, or network failed
Power off
Network is disconnected
Connected to network
RED
Upgrading firmware
Green
Restoring defaults
RED
Status after a reset (network connected)
Status after a reset (network disconnected)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fd8182-tFd8182-f2Fd816b-hf2

Table of Contents