Listening To The Radio; Tuning Into Fm Radio Stations - Onkyo CR-715 Instruction Manual

Listening to the Radio

Tuning into FM Radio Stations

TUN/
TUN
When tuned into a station, the Tuned
appears. When tuned into a stereo FM station, the FM ST
indicator appears as well.
AUTO
Tuning into weak stereo FM stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Adjusting the Antennas
Adjusting and installing the FM antenna
Choose a location for the FM antenna while listening to an FM station.
1
Change the direction of the antenna to
achieve the best reception.
36
YES/MODE
BAND
indicator
FM ST
1
Press the [BAND] button repeat-
edly to select FM.
2 Press the [YES/MODE] button
repeatedly to select Auto or Man-
ual.
•
•
3
Use the Tuning [
buttons to tune into a station.
In Auto tuning mode, once a station is
found, tuning stops automatically.
The CD receiver changes FM frequency
in 0.05 MHz steps.
In Manual Tuning mode, the frequency
stops changing when you release the but-
ton. Press the button repeatedly to
change the frequency one step at a time.
2
Affix the antenna with a thumbtack. (Do not
push the thumbtack through the antenna.)
Caution: Be careful not to prick your finger!
Auto Tuning Mode
The AUTO indicator appears and ste-
reo radio reception is possible.
Manual Tuning Mode
The AUTO indicator is not displayed
and radio reception will be in mono.
AUTO indicator
TUN]/[TUN ]