Connecting An Onkyo Cassette Deck - Onkyo CR-715 Instruction Manual

Connecting Other Components—Continued

Connecting an Onkyo Cassette Deck

The following diagram shows how to connect an optional Onkyo cassette deck.
Connect the CD receiver's MD/TAPE OUT jacks to the cassette deck's INPUT (REC) jacks, and connect the CD
receiver's MD/TAPE IN jacks to the cassette deck's OUTPUT (PLAY) jacks.
CD receiver's
LINE 1
DOCK/
CDR
What can you do with
• Connecting an Onkyo cassette deck to the CD receiver with an
the CD receiver's remote controller. In addition, when playback is started on the cassette deck, the CD receiver will
automatically select it as the input source.
• To use , you must connect the Onkyo cassette deck to the CD receiver with an
cable (RCA). In addition, the Input Display for the MD/TAPE jacks must be set to "TAPE." Since this is the default
setting, unless you've changed it, it can be left as it is (see page 27).
• Some -capable components have two
is for connecting additional
18
rear panel
Red
I N
White
OUT
MD/
TAPE
White
I N
OUT
Red
IN
R L
the Onkyo cassette deck
?
-capable components.
Analog audio cables (RCA)
cable supplied with
cable allows you to control the cassette deck with
jacks. They're both the same, so you can use either one. The extra jack
Onkyo cassette deck's
rear panel
INPUT OUTPUT
REMOTE
(REC) (PLAY)
CONTROL
L
R
White Red Red White
cable and an analog audio