Table of Contents
Advertisement
VFF Vent Free Fireplace System
4. Place left rear log (#4) on pin located on rear support
bracket on left side and left grate bar. Figure 32
Left Rear
Log #4
Figure 32
5. Place left front log (#5) on left pin located on burner and
left grate bar. Rest top right portion of log on right front
log. Figure 33
Left Front
Log #5
Figure 33
6. Place top left log (#6) on left rear log (#4) and left front
log (#5) using locating grooves on bottom of #6 and
locating blocks on logs #4 and #5. Figure 34
7. Place right top log (#7) on right rear log (#3) and right
front log (#2) using locators on the bottom of log #7 and
locators on logs #2 and #3. Figure 34
Left Top Log #6
Figure 34
26
Right Top
Log #7
LOG AND MEDIA PLACEMENT
8. Place small right front top log (#8) on log #7 and log
#2 using locating grooves on the bottom of log #8 and
locating blocks on log #7 and log #2. Figure 35
Figure 35
PLACE THE DECORATIVE ROCK
Optional volcanic rock may be placed around the unit on
the fl oor of the fi rebox. Be sure to avoid any areas on the
burner itself.
DO NOT sprinkle volcanic rock on the logs,
around the pilot, or on or near burners. This
may cause sooting. Place volcanic rock only
on the fl oor of the fi replace.
During initial operation of the new heater,
new burning logs and/or rock wool will give
off a paper burning smell and orange fl ames
will be present. Simply open the windows for
a few hours to vent the odor.
KENTUCKY WILDWOOD KW24-R LOGS
PLACEMENT (AVAILABLE FOR MONESSEN
AND MAJESTIC SYSTEMS)
1. Place bottom front right log #1 on right pin located on
burner and right grate bar.
Figure 36
Right Front Top
Log #8
Log #1
20308184
Advertisement
Table of Contents
