Charging The Battery - Toro 74253 Setup Instructions

Step
6

Charging the Battery

No Parts Required
Procedure
Charging the battery produces gasses that
can explode and cause serious injury.
• Keep cigarettes, sparks and flames away
from the battery.
• Make sure the ignition switch is off.
• Ventilate when charging or using the
battery in an enclosed space.
Important: Do not run the machine with
the battery disconnected; electrical damage
may occur to the engine.
Charge the battery. Refer to the Operator's Manual
for instructions.
Figure 11
Step
7
Checking the Machine for
Grease
Parts needed for this step:
Number 2 general purpose lithium base
1 tube or molybdenum base grease. (Purchase
separately.)
Procedure
1. Remove the belt covers on domestic machines
as shown below.
Figure 12
2. Remove the belt covers and bolts on
international machines as shown below.
5