Table of Contents
Advertisement
Lubrication
The machine has grease fittings that must be lubricated
regularly with No. 2 General Purpose Lithium Base
Grease. Lubricate the front wheel bearings after every
25 hours of operation. Lubricate the steering shaft every
100 hours.
Lubricate the following bearings and bushings:
• Front wheel bearing (2) (Figure 14)
Figure 14
• Steering shaft and sprocket (Figure 15)
Figure 15
Note: Do not lubricate the steering chain unless it
becomes stiff because of rust. If the chain rusts, it
may be lubricated lightly with a dry-type lubricant.
Greasing the Machine
Service Interval: Every 25 hours
Every 100 hours
1. Wipe the grease fitting clean so that foreign matter
cannot be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing.
3. Wipe up excess grease.
22
Advertisement
Table of Contents
