Care And Cleaning - Daikin FTX09NMVJU Operation Manual

Hide thumbs Also See for FTX09NMVJU:
Table of Contents

Advertisement

Care

Care and Cleaning

FTX09NMVJU / FTX12NMVJU / FTXN09NMVJU / FTXN12NMVJU
„ Titanium apatite photocatalytic air-purifying fi lter
1.
Open the front panel and
pull out the air fi lters.
2.
Take off the titanium apatite
photocatalytic air-purifying
fi lters.
• Remove the fi lters from the tabs.
3.
Clean or replace the
titanium apatite
photocatalytic air-purifying
fi lters.
[Cleaning]
3-1 Vacuum dust, and soak in lukewarm
water or water for about 10 to
15 minutes if very dirty.
3-2 After washing, shake off remaining
water and let them dry in the shade�
• Do not wring out the fi lter to remove water from it.
21
[Replacement]
Remove the fi lter from the tabs
Page 20
and prepare a new one�
• Dispose of the old fi lter as non-fl ammable waste.
4.
Insert the titanium apatite
photocatalytic air-purifying
fi lters as they were.
• When attaching the fi lter, check that the fi lter is
properly set in the tabs.
5.
Reattach the fi lters.
6.
Close the front panel slowly�
NOTE
• Operation with dirty fi lters:
− cannot deodorize the air,
− cannot clean the air,
− results in poor heating or cooling,
− may cause odor.
• Dispose of old fi lters as non-fl ammable waste.
• To order a titanium apatite photocatalytic air-purifying fi lter, contact
the dealer where you bought the air conditioner.
Item
Part No�
Page 20
Titanium apatite photocatalytic
air-purifying fi lter 1 set
KAF970A46 (without frame)
Page 20

Advertisement

Table of Contents
loading

Table of Contents