Asus Z97-A/USB 3.1 User Manual page 106

The following items appear only when you set the Boot Logo Display to [Disabled].
Post Report [5 sec]
This item allows you to select a desired POST report waiting time.
Configuration options: [1 sec] - [10 sec] [Until Press ESC]
2.8.4 Bootup NumLock State [Enabled]
This item allows you to enable or disable power-on state of the NumLock.
Configuration options: [Disabled] [Enabled]
2.8.5 Wait For 'F1' If Error [Enabled]
This item allows your system to wait for the <F1> key to be pressed when error occurs.
Configuration options: [Disabled] [Enabled]
2.8.6 Option ROM Messages [Enabled]
[Enabled]
[Disabled]
2.8.7 Interrupt 19 Capture [Disabled]
This item allows you to trap Interrupt 19 by the option ROMs.
Configuration options: [Disabled] [Enabled]
2.8.8 Above 4G Decoding [Disabled]
This item allows you to decode the 64-bit capable devices above 4G address space. Ensure
that your system supports 64-bit PCI decoding.
Configuration options: [Disabled] [Enabled]
2.8.9 Setup Mode [EZ Mode]
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
2.8.10 CSM (Compatibility Support Module)
This item allows you to configure the CSM (Compatibility Support Module) items to fully
support the various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM [Enabled]
[Auto]
[Enabled]
[Disabled]
2-52
The third-party ROM messages will be displayed during POST.
Disables the ROM messages and displays only the ASUS logo during
POST.
This item allows you to go to EZ Mode of the BIOS after POST.
The system automatically detects the bootable devices and the add-on
devices.
For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows
Disables the CSM to fully support the non-UEFI driver add-on devices or
the Windows UEFI mode.
®
UEFI mode.
®
Chapter 2: BIOS information