Asus Z97-A/USB 3.1 User Manual page 105

PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These settings
only apply when fastboot is enabled.
[Auto] For a faster POST time, PS/2 devices are only available when the system
boots up or rebooted when the PS/2 devices are not reconnected or
changed. If you disconnect or change the PS/2 devices before restarting
the system, PS/2 devices will not be available and BIOS will not be
accessible via PS/2 devices.
[Full For full system control, PS/2 devices are available during POST at any
Initialization] circumstances. This process extends POST time.
[Disabled] For a fastest POST time, all PS/2 devices are not available until your
computer enters the operating system.
Network Stack Driver Support [Disabled]
[Disabled] Select to skip the network stack driver from loading during POST.
[Enabled] Select to load the network stack driver during POST.
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot] Accelerates the boot speed on the next boot after an AC power loss.
2.8.2 DirectKey (DRCT) [Enabled]
[Disabled] Disables the DirectKey button. The system will only power on or off when
you press the DirectKey button.
[Enabled] Allows the system to power on and go to the BIOS Setup directly when you
press the Reset button. Connect the 2-pin connector of the chassis reset
buton cable to the onboard DRCT header.
2.8.3 Boot Logo Display [Auto]
[Auto] Sets the boot logo to display during POST.
[Full Screen] Sets the boot logo display in full screen during POST.
[Disabled] Disables the boot logo display during POST.
The following item appears only when you set the Boot Logo Display to [Auto] and [Full
Screen].
Post Delay Time [3 sec]
This item allows you to select a desired additional POST waiting time to easily enter the BIOS
Setup. You can only execute the POST delay time during normal boot. The values range
from 0 to 10 seconds.
This feature only works when set under normal boot.
ASUS Z97-A/USB 3.1 2-51