Toro 30873 Operator's Manual page 20

Protected Menus
There are 4 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter: auto
idle, maximum mowing ground speed, maximum transport
ground speed, and deck counter balance. These settings are
in the Protected Menu.
Accessing the Protected Menu Settings
To access the Protected Menu Settings
•
From the Main Menu, scroll down to the Settings Menu
and press the right button.
•
In the Settings Menu, scroll down to the Protected Menu
and press the right button.
•
To enter the passcode, use the center button to set the
first digit then press the right button to move on to the
next digit.
•
Use the center button to set the second digit then press
the right button to move on to the next digit.
•
Use the center button to set the third digit then press the
right button to move on to the next digit.
•
Use the center button to set the fourth digit then press
the right button.
•
Press the middle button to enter the code.
The ability to view and change the settings in the Protected
Menu can be changed. Once the Protected Menu has been
accessed, scroll down to Protect Settings. Using the right
button, changing Protect Settings to OFF will allow the
ability to view and change the settings in the Protected Menu
without entering the passcode. Changing Protect Settings to
ON will hide the protected options and will require entering a
passcode to change the setting in the Protected Menu. After
the passcode has been set, the key switch must be turned off
and back on to enable and save this feature.
To Set the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle
•
Press the right button to change the auto idle time
between OFF, 8S, 10S, 15S, 20s, & 30S.
To Set the Mow Speed
•
In the Settings Menu, Scroll down to Mow Speed and
press the right button.
•
Use the right button to increase the max full mow speed
(50%, 75%, or 100%).
•
Use the center button to decrease the max full mow speed
(50%, 75%, or 100%).
•
Press the left button to exit.
To Set the Transport Speed
•
In the Settings Menu, scroll down to Transport Speed
and press the right button.
•
Use the right button to increase the max transport speed
(50%, 75%, or 100%).
•
Use the center button to decrease the max transport
speed (50%, 75%, or 100%).
•
Press the left button to exit.
To Set the Counterbalance
•
In the Settings Menu, scroll down to Counter Balance
and press the right button.
•
Press the right button to switch between Low, Med, and
High.
When finished with the Protected Menu, press the left button
to exit to the Main Menu, then press the left button to exit
to the Run Menu.
20