Toro 30873 Operator's Manual page 19

Using the Menus
To access the InfoCenter menu system, press the menu access
button while at the main screen. This will bring you to the
main menu. Refer to the following tables for a synopsis of
the options available from the menus:
Main Menu
Menu Item
Faults
Service
Diagnostics
Settings
About
Service
Menu Item
Hours
Counts
Diagnostics
Menu Item
Engine Run
Description
The Faults menu contains
a list of the recent machine
faults. Refer to the Service
Manual or your Authorized Toro
Distributor for more information
on the Faults menu and the
information contained there.
The Service menu contains
information on the machine
such as hours of use and other
similar numbers.
The Diagnostics menu lists
various states that the machine
currently has. You can use this
to troubleshoot certain issues
as it will quickly tell you which
machine controls are on and
which are off.
The Settings menu allows
you to customize and modify
configuration variables on the
InfoCenter display.
The About menu lists the
model number, serial number,
and software version of your
machine.
Description
Lists the total number of hours
that the machine, engine and
fan have been on, as well
as the number of hours the
machine has been transported
and overheated.
Lists the number of preheats
and starts the machine has
experienced.
Description
Refer to the Service Manual
or your Authorized Toro
Distributor for more information
on the Engine Run menu
and the information contained
there.
Glow Plugs
Fan
Settings
Menu Item
Units
Language
LCD Backlight
LCD Contrast
Protected Menus
Auto Idle
Mow Speed
Trans. Speed
Counterbalance
Smart Power
* Only "operator-faced" text is translated. Faults, Service, and
Diagnostics screens are "service-faced". Titles will be in the
selected language, but menu items are in English.
About
Menu Item
Model
SN
S/W Rev
InfoCenter
CAN Bus
19
Indicates if the following items
are active: Key start, timeout
limited, and glowplugs.
Indicates if the fan is active
in the following instances:
Engine high temp, oil high
temp, engine or hydraulic high
temp, and fan on.
Description
Controls the units used on the
InfoCenter. The menu choices
are English or Metric.
Controls the language used on
the InfoCenter*.
Controls the brightness of the
LCD display.
Controls the contrast of the
LCD display.
Allows the maintenance
director to access protected
menus by inputting a
passcode.
Controls the time that before
idling the engine when the
machine not in use.
Controls the maximum speed
while in mow (low range).
Controls the maximum speed
while in transport (high range).
Controls the amount of
counterbalance applied by the
decks.
Prevents bogging down in
heavy turf by automatically
controlling the machine
speed and optimizing cutting
performance.
Description
Lists the model number of the
machine.
Lists the serial number of the
machine.
Lists the software revision of
the master controller.
Lists the software revision of
the InfoCenter.
Lists the machine
communication bus status.