How To Measure Weight Only - Omron HBF-500 Instruction Manual

HOW TO MEASURE WEIGHT ONLY

1. Press the Power Switch to turn the monitor ON.
The CAL symbol blinks on the display, then the display
changes to 0.0 lb.
Wait until 0.0 lb appears on the display.
NOTES:
• If you step onto the monitor before 0.0 lb appears on the
display, an error message "Err" will appear.
• This monitor can be set to either the US or Metric
System. Personal Profile and memory will be displayed
by selected system. To change the US/Metric mode:
1) Keep the
2) Press the
3) Press the SET button to confirm the change.
2. Step onto the Measurement Platform.
Stand with your weight evenly distributed on the
measurement platform.
Remain still and do not move until the measurement is
complete.
3. Step off the Measurement Platform.
4. Press the Power Switch to turn the monitor off.
UP button pressed until "lb" and "kg" blink on the display.
UP or DOWN button to select the desired measurement unit, "lb" or "kg".
32