Dimensions; Specifications - Viking D3 Installation Manual

Freestanding 30” gas self-clean sealed burner range
Hide thumbs Also See for D3:
Table of Contents

Advertisement

Dimensions

RDSCG
27-1/8"
25"
(63.5 cm)
6"
(15.2 cm)
29"
(73.7 cm)
25"
(63.5 cm)
19-1/4"
25-3/4"
(48.9 cm)
45"
(114.3 cm)
24"
(61.0 cm)
Note: Units shown with island trim.
6
2 9
- 7 /
( 7 5
8 "
. 9
c m
)
3 5
( 9 1
- 7 /
. 1
8 "
c m
) m
t o
i n .
3 7
( 9 4
"
. 0
c m
) m
a x
.
(68.9 cm)
2-3/8"
(6.0 cm)
35-7/8"
(91.1 cm) min.
to
37"
(94 cm) max.
(65.4 cm)

Specifications

Gas 30" W. Range
Description
Overall width
Overall height
To top of side trim - 35-7/8" (91.1 cm) min. 37" (94.0 cm) max.
Legs adjust - 1-1/8" (2.9 cm)
Overall depth
To front of side panel - 25" (63.5 cm)
from rear
To front of door - 25-3/4" (65.4 cm)
To front of control panel - 27-1/8" (68.9 cm)
To end of knobs - 29" (73.7 cm)
To top of island trim - add 0" (0.0 cm)
Additions to Overall
To top of backguard - add 6" (15.2 cm)
Height
To top of high shelf - add 18-3/16" (46.2 cm)
Gas Requirements
Shipped standard for Natural gas, field convert with LP conversion kit (purchased
separately); accepts standard residential 1/2" (1.3 cm) ID gas service line
Gas Manifold Pressure
Natural 5.0" W.C.P./ Liquid Propane L/P 10.0" W.C.P.
Electrical Requirements
120VAC/60 Hz; 4 ft. (121.9 cm), 3-wire cord with grounded
3-prong plug attached to unit
Max Amp Usage
Surface Burner Rating
Natural/LP
Left front
18,000 BTU Nat/16,500 BTU LP/Propane (5.3 kW Nat/4.8 kW LP/Propane)
Left rear
8,000 BTU Nat/6,500 BTU LP/Propane (2.3 kW Nat/1.9 kW LP/Propane)
Center
9,000 BTU Nat/8,000 BTU LP/Propane (2.7 kW Nat/2.3 kW LP/Propane)
Right rear
12,000 BTU Nat/11,000 BTU LP/Propane (3.5 kW Nat/3.2 kW LP/Propane)
Right front
17,000 BTU Nat/15,000 BTU LP/Propane (5.0 kW Nat/4.4 kW LP/Propane)
Oven Interior Width
Oven Interior Height
Oven Interior Depth
Overall - 18-3/4" (47.6 cm)
AHAM - 15-3/8" (39.2 cm)
Oven Volume
Overall
AHAM
Approximate
shipping weight
Note: Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and not certified by
CSA. Clearances to non-combustible materials must be approved by the authority having jurisdiction.
Minimum clearances from adjacent combustible construction:
Below cooking surface (36" [91.4 cm] and below)
• Sides - 0"
• Top grate support - 36" (91.4 cm)
Above cooking surface (above 36" [91.4 cm])
• Sides - 6" (15.2 cm)
• Within 6" (15.2 cm) side clearance, wall cabinets no deeper than 13" (33.0 cm) must be minimum 18"
(45.7 cm) above cooking surface
• Wall cabinets directly above product must be a minimum of 42" (106.7 cm) above cooking surface
• Rear - 0" with 6 " backguard or high shelf; 0" with island trim and non-combustible rear wall;
• 6" (15.2 cm) with island trim and combustible rear wall
7
RDSCG230-5B
29-7/8" (75.9 cm)
0.74 amps
23" (58.4 cm)
16-1/8" (40.9 cm)
4.0 cu. ft.
3.3 cu. ft.
410 lbs.
(184.5 kg)

Advertisement

Table of Contents
loading

Table of Contents