Changing Personal Data - Omron FULL BODY SENSOR BODY COMPOSITION MONITOR AND SCALE HBF-516 Instruction Manual

SETTING PERSONAL DATA
SETTING THE GENDER
Set the gender to
1) Press the
2) Press the SET button.
The gender is set.
The default value for height blinks on the display.
SETTING THE HEIGHT
Set the height between 3' 4" and 6
(Display range in metric display mode: 100.0 cm to 199.5 cm)
1) Press the
2) Press the SET button.
The height is set.
The current settings for age, gender and height appear in this sequence on the display.
The 0.0 lb symbol appears on the display. You can now take a measurement using the Personal
Profile Number you selected or the Guest mode.
Refer to HOW TO TAKE A MEASUREMENT on pages 25 to 29.

CHANGING PERSONAL DATA

If your personal data changes, the information in the Personal Profile Number you selected must be
changed for measurement results to be calculated correctly.
1. Press the Power Switch to turn the monitor ON.
The CAL symbol blinks on the display, then the display changes to 0.0 lb.
Wait until 0.0 lb appears on the display.
male or female.
UP or DOWN button to change the gender.
6 3/4".
'
UP or DOWN button to change the height.
23