BOMBARDIER rally 200 Operator's Manual page 110

V06G0RY
Lift and hold the spindle then remove the bulb.
V06G0SY
Properly reinstall removed parts in the re-
verse order of their removal.
Adjust beam aiming as follows:
Turn knobs to adjust beam height and side
orientation to your convenience.
108
Adjust both headlamps evenly.
3
V06G0TY
TYPICAL
1. Headlamp housing
2. Beam height adjustment
3. Beam side adjustment
Taillight
Unscrew lens screws to expose bulb.
V06G0UY
TYPICAL
1. Lens
2. Screws
Push bulb in and hold while turning counter-
clockwise to release.
Install the new bulb by first pushing in while
turning clockwise. Reinstall lens.
1 2
2
1