Troubleshooting - Omron IntelliSense HEM-705CP Instruction Manual

Main Unit:
If you continue to have difficulty obtaining a reading, call
Please tell the representative you have an OMRON Model HEM-705CP.

TROUBLESHOOTING

TITLE
Cuff under-inflated.
Movement during
measurement.
Cuff over-inflated
(more than 300 mmHg).
Battery voltage
is excessively low.
Problem caused by abnormal
memory function.
urn monitor off, wait 2-3 minutes
T
and take another measurement.
Repeat steps listed under "How
to Take a Reading." If "EE"
is displayed again, take another
measurement by pressing and
holding the START button
as shown on instruction page
12 under "How to Take
a Reading", instructions
for special conditions.
Your cuff maybe wrapped
too tightly around your arm.
Turn the monitor off, carefully
read and repeat steps listed
under "How to Take a Reading."
Replace all four "AA" batteries
with new batteries.
Refer to warranty page for sending
unit in for repair service.
21
.