Advertisement
Preparations for Use
7 Apply Pressure to the Cuff
1 . When you press the start button, the pump
operates and pressure is applied . When
the pressure reaches 170mmHg, the
pump stops automatically .
Notes:
* If your systolic blood pressure is higher
than 140mmHg, the pump starts again and
the cuff will be inflated up to 210mmHg .
* If your systolic blood pressure is higher
than 180mmHg, sufficient inflation will
not be applied to the cuff by automatic
reinflation . In this case, inflate up to
30mmHg higher than your expected
systolic blood pressure by pressing the
start button continuously . While press-ing
the start button, the cuff can be in-flated
continuously, and when the start button
is released, the pump stops and the cuff
is no longer inflated . When the pressure
reaches 300mmHg, the cuff deflates
rapidly .
* When you want to stop measurememt,
press SPHYG/CLOCK button . The pres-
sure will stop and the air is deflated rapidly .
Pressure being applied
Depress the START
button
continuously
untill the cuff is inflated
up to the targeted
pressure .
2 . When the appropriate pressure has been
reached, the air is automatically released
and the value on the display window
starts to decrease . After a while when the
artery oscillations are detected, the ( ♥ )
symbol starts flashing and the unit emits
a beep-ing sound simultaneously . The
value shown on the display will continue
to fall .
* During measurement, do not shake
the cuff or the air tube .
8
After the cuff has
been
inflated,
release the START
button .
Targetted Blood
Pressure Reached
Indicated Value Drops
Measuring
Hide quick links:
Advertisement
