Brake Pedals; Throttle Control - Toro 30868 Groundsmaster 4700-D Operator's Manual

Figure 4
1. Traction pedal
2. Forward speed control
3. Key switch
4. Engine oil pressure warning
light
Charge Indicator
The charge indicator (Figure 4 ) illuminates when the
system charging circuit malfunctions.
Engine Coolant Temperature Warning
Light
The light (Figure 4 ) illuminates and the engine
shuts down when coolant reaches an excessively high
temperature.
Glow Plug Indicator Light
When lit, the glow plug indicator light (Figure 4 )
indicates that the glow plugs are on.
Speed Limiter Screws
Adjust the screw(s) (Figure 5 ) to limit the amount
the traction pedal can be depressed in the forward or
reverse direction to limit speed.
Important: The speed limiter screw must stop
the traction pedal before the pump reaches full
stroke or damage to the pump may occur.
5. Charge indicator
6. Engine coolant
temperature warning
light
7. Glow plug indicator light
Figure 5
1. Forward speed limiter
screw

Brake Pedals

Two foot pedals (Figure 6 ) operate individual wheel
brakes for turning assistance, parking, and to aid in
obtaining better side hill traction. A latch connects the
pedals for parking brake operation and transport.
Figure 6
1. Brake pedals
2. Pedal locking latch
Pedal Locking Latch
The pedal locking latch (Figure 6 ) connects the pedals
together to engage the parking brake.
Parking Brake Latch
A knob on the left side of the console actuates the
parking brake lock (Figure 6 ). To engage the parking
brake, connect the pedals with the locking latch, push
down on both pedals, and pull the parking brake latch
out. To release the parking brake, depress both pedals
until the parking brake latch retracts.

Throttle Control

Move the control (Figure 7 ) forward to increase the
engine speed and rearward to decrease the speed.
16
2. Reverse speed limiter screw
3. Parking brake latch